DE  /  EN  | 

0 60 27 / 40 64 0

SPANNRIT GmbH
Industriestraße 3 | 63801 Kleinostheim

Experience for the future of orthopedics

Other products

MEMOPUR®-MILLING BLOCKS

MEMOPUR® MILLING BLOCK – Part no. FB9

MEMOPUR® MILLING BLOCK – Part no. FB32

MEMOPUR® MILLING BLOCK – Part no. FB37

MEMOPUR® MILLING BLOCK – Part no. FB42

STOCK ARTICLES

Part no. L1210A13A1069AHZ05 / L4013A45A0040AAP70 / L1210A46A1074AH

Part no. L4113A14A0076AHP176 / L9440A14A2074AHP174

BASIC MODELS

BENEFITS ATA GLANCE:
  • good grindingproperties

  • good adhesive properties

SOFT FOAM INSOLE – Part no. M7337500076

CORK INSOLE – Part no. C8125500076

PLASTIC INSOLE – Part no. L1210A50A1074AH / L1610A50A1060AC

CHILDREN'S BLANKS

The kids' blanks are characterized by their smooth edges; thus the risk of pressure sores is significantly reduced. The spring in the longitudinal arch forces the muscles to remain active and promotes their continued development.

The insole blanks can be fitted closely to the child's foot through the good molding properties of the thermoplastic and the inclusion of wedges.

Benefits ata glance:
  • good properties

  • good adhesive properties

  • 96 % restoring force

  • preformedfrom above and below

  • high moisture absorption

  • optimal pressure distribution

  • machine washable

MEMOPUR® KIDS – Part no. M8864290052

MEMOPUR® KIDS – Part no. M8870290052

SPANNTEC® KIDS – Part no. M6164290052

SPANNTEC® KIDS – Part no. S9140290044

SPANNTEC® KIDS – Part no. S9140331044A20

SENSO KIDS – Part no. C5030

SENSO KIDS – Part no. W5290025

FOAM BLANKS

BENEFITS ATA GLANCE:
  • thermoformable

  • good grinding

  • goodspring action

Material: PE-EVA Ergolan foam
Properties: thermoformable, easy to grind, good spring action
Processing: Bonding: recommended TR-adhesive, roughened if necessary
Molding: the heat gun at about 350 ° C applied to both sides of the body, forming
for a moment, finished
Features: • 17 different upper materials
• forefoot 2, 3, 4 mm
• cowhide in 1.2 and 2.0 mm
• heel pads (only 3 mm cushioned heel)
• Carbosan foam 2, 3, 4 mm, 15 Shore beige (like PPT) and 25 Shore gray
• extra thin (the core prior to bonding to 0.5 mm in the heel ground thin)
• pelotte position - to be determined, ie pad forwards or backwards positioned
• 9 different selectable pads
• finishing service level options, from completely glued and finished, bonded to pad, all lose, covering only or under fabric glued

Part no. W3112 / W3113 / W3117

Part no. W3123 / W3313

Part no. W3513 / W3613

Part no. W3913 / W4013

Part no. W4113A00A0088AHS01 / W4713

PLASTIC BLANKS

BENEFITS ATA GLANCE:
  • thermoformable

  • good grinding

  • goodspring action

  • high toughness

Material: Polypropylene
Processing: Bonding: recommended TR-adhesive, roughened if necessary
Molding: the heat gun at about 350 ° C applied to both sides of the body, forming
for a moment, finished
Features: • 17 different upper materials
• forefoot 2, 3, 4 mm
• cowhide in 1.2 and 2.0 mm
• heel pads (only 3 mm cushioned heel)
• Carbosan foam 2, 3, 4 mm, 15 Shore beige (like PPT) and 25 Shore gray
• extra thin (the core prior to bonding to 0.5 mm in the heel ground thin)
• pelotte position - to be determined, ie pad forwards or backwards positioned
• 9 different selectable pads
• finishing service level options, from completely glued and finished, banded to pad, all lose, covering only or under fabric glued

Part no. K1110 / K1210

Part no. K1310 / K1410

Part no. K1510 / K1610

Part no. K1710 / K1810

Part no. K2021 / K2282

Part no. K2728

Part no. K1928

CORK BLANKS

BENEFITS ATA GLANCE:
  • good durability

  • notbrittle

  • good grinding

  • thermoformable

  • light

PE-Cork is an in-house development from SPANNRIT and consists of 80 % Cork and 20 % PE. Its processing and molding properties are similar to the material Ortholen. The cushioning properties correspond to those of cork.

Material: • Compressed cork
• Flexcork
• PE-Cork
• Microcork

Part no. 3116 / 3116V / 3130 / 3124 / 3124 / 3126 /C3830 / C3826

Part no. C4230 / C4418 / C5518

Part no. C5418 / C8125180076

COMPONENTS

Part no. V50 / P245 / G50

Part no. VH50

MODULAR SYSTEMS

Part no. W3813 / W4713 / WM06

Part no. WM04 / WM09

Part no. WM03 / WM07

Cookie settings

To continue, you must make a cookie selection. Further information can be found in our privacy policy.

* Only one cookie is set that prevents tracking and analytic cookies.