DE  /  EN  | 

0 60 27 / 40 64 0

SPANNRIT GmbH
Industriestraße 3 | 63801 Kleinostheim

Experience for the future of orthopedics

Other products

MEMOPUR®-MILLING BLOCKS

STOCK ARTICLES

BASIC MODELS

BENEFITS AT A GLANCE:
  • good grinding properties

  • good adhesive properties

CHILDREN'S BLANKS

The kids' blanks are characterized by their smooth edges; thus the risk of pressure sores is significantly reduced. The spring in the longitudinal arch forces the muscles to remain active and promotes their continued development.

The insole blanks can be fitted closely to the child's foot through the good molding properties of the thermoplastic and the inclusion of wedges.

Benefits at a glance:
  • good properties

  • good adhesive properties

  • 96 % restoring force

  • preformed from above and below

  • high moisture absorption

  • optimal pressure distribution

  • machine washable

FOAM BLANKS

BENEFITS AT A GLANCE:
  • thermoformable

  • good grinding

  • good spring action

Material: PE-EVA Ergolan foam
Properties: thermoformable, easy to grind, good spring action
Processing: Bonding: recommended TR-adhesive, roughened if necessary
Molding: the heat gun at about 350 ° C applied to both sides of the body, forming
for a moment, finished
Features: • 17 different upper materials
• forefoot 2, 3, 4 mm
• cowhide in 1.2 and 2.0 mm
• heel pads (only 3 mm cushioned heel)
• Carbosan foam 2, 3, 4 mm, 15 Shore beige (like PPT) and 25 Shore gray
• extra thin (the core prior to bonding to 0.5 mm in the heel ground thin)
• pelotte position - to be determined, ie pad forwards or backwards positioned
• 9 different selectable pads
• finishing service level options, from completely glued and finished, bonded to pad, all lose, covering only or under fabric glued

PLASTIC BLANKS

BENEFITS AT A GLANCE:
  • thermoformable

  • good grinding

  • good spring action

  • high toughness

Material: Polypropylene
Processing: Bonding: recommended TR-adhesive, roughened if necessary
Molding: the heat gun at about 350 ° C applied to both sides of the body, forming
for a moment, finished
Features: • 17 different upper materials
• forefoot 2, 3, 4 mm
• cowhide in 1.2 and 2.0 mm
• heel pads (only 3 mm cushioned heel)
• Carbosan foam 2, 3, 4 mm, 15 Shore beige (like PPT) and 25 Shore gray
• extra thin (the core prior to bonding to 0.5 mm in the heel ground thin)
• pelotte position - to be determined, ie pad forwards or backwards positioned
• 9 different selectable pads
• finishing service level options, from completely glued and finished, banded to pad, all lose, covering only or under fabric glued

Part no. K1110 / K1210

Part no. K1310 / K1410

Part no. K1510 / K1610

Part no. K1710 / K1810

Part no. K2021 / K2282

CORK BLANKS

BENEFITS AT A GLANCE:
  • good durability

  • not brittle

  • good grinding

  • thermoformable

  • light

PE-Cork is an in-house development from SPANNRIT and consists of 80 % Cork and 20 % PE. Its processing and molding properties are similar to the material Ortholen. The cushioning properties correspond to those of cork.

Material: • Compressed cork
• Flexcork
• PE-Cork
• Microcork

COMPONENTS

Part no. V50 / P245 / G50

Part no. VH50

MODULAR SYSTEMS

Part no. W3813 / W4713 / WM06

Part no. WM04 / WM09

Part no. WM03 / WM07